Switch Gigabit L3 POE 720W +4 SFP 10G Tp-Link Omada SG6428XHP

CARACTERÍSTICAS DE HARDWARE 

Interfaz 24× 10/100/1000 Mbps PoE+ RJ45 Ports

  4× 10G SFP+ Slots

  2× USB 2.0 Ports

  1× RJ45 Console Port

  1× USB Type-C Console Port

  1× RJ45 Management Port

Cantidad de Ventiladores Four Field-replaceable and Hot-swappable Fans

Fuente de Alimentación Two Field-replaceable and Hot-swappable Power Supply Modules** (100240 VAC, 50/60 Hz)

Puertos PoE (RJ45) Standard: 802.3at/af compliant

  PoE+ Ports: 24 Ports, up to 30 W per port

  PoE Power Budget: up to 720 W*

Dimensiones 17.3 × 16.5 × 1.7 in (440 × 420 × 44 mm)

Montaje Rackmountable

Consumo de Potencia Máximo 42.9 W (110 V/60 Hz) (With no PD connected)

  916.6 W (110 V/60 Hz) (With 720 W PD connected and powered by 2× PSM500-AC)

Disipación máxima de calor 146.29 BTU/hr (110 V/60 Hz) (With no PD connected)

  3,125.61 BTU/hr (110 V/60 Hz) (With 720W PD connected and powered by 2× PSM500-AC)

RENDIMIENTO

Capacidad de Conmutación 128 Gbps per Unit

Apilamiento Stacking Number: 4

  Stacking Port: 10G SFP+ Slot (all uplink ports can be used as stacking ports)

  Stack Bandwidth: Up to 80 Gbps (4 stack ports)

Tasa de Reenvío de Paquetes 95.2 Mpps

Tabla de Direcciones MAC 32 K

Memoria del Buffer de Paquete 3 MB

Jumbo Frame 9 KB

CARACTERÍSTICAS DE SOFTWARE

Calidad de Servicio Class of Service

  - 8 Queues of Priority

  - Port Priority

  - IEEE 802.1p Priority

  - DSCP Priority

  - Queue Min-Bandwidth

  - Schedule Mode (SP, WRR, SP+WRR)

  Bandwidth Control

  - Rate Limit

  - Storm Control

  Voice VLAN

  User-Defined OUI

  Smoother Performance

  Action for Flows

  - QoS remark (802.1P Remark, DSCP Remark)

Características L3 IP Interfaces:

  - IPv4: Max 256, IPv6: Max 256

  Static Routing

  - Max 1,024, IPv6: Max 512

  Host Route Table: Max 6,100 entries

  RIP: Version v1/v2, Max 8,190

  OSPF: Version v2/v3; v2: Max 8,190, v3: Max 4,097

  VRRP: Version v2/v3, Max 64 groups

  ECMP: 256 entries, max 32 ECMP Nexthops per Destination

  Static ARP: 512 static entries

  Dynamic ARP: 7,680 dynamic entries

  Proxy ARP

  DHCP Server:

  - Max 8K IP Pools

  - Max 1,000 Manual Binding Entries

  DHCP Relay:

  - Relayed Interface

  - Relayed VLAN

Características L2 y L2+ Link Aggregation

  Spanning Tree Protocol

  Port-based and VLAN-based Loopback Detection

  802.3x Flow Control

  Supports 2,048 IGMP groups

  ERPS

  Mirroring

  RSPAN

  MAC Address Table

  PIM-DM (IPv4)

  Multicast

  - IGMP Snooping

  - MLD Snooping

  - L2 Multicast Table

  - Fast Leave

  - Multicast VLAN Registration (MVR)

  - Static Multicast IP

  - Multicast Filtering

Características Avanzadas Automatic Device Discovery

  Batch Configuration

  Batch Firmware Upgrading

  Intelligent Network Monitoring

  Abnormal Event Warnings

  Unified Configuration

  Reboot Schedule

  ISP Features:

  802.3ah Ethernet Link OAM

  L2PT (Layer 2 Protocol Tunneling)

  Device Link Detect Protocol (DLDP)

  DDM

  sFlow

VLAN Max 4K VLAN Group (802.1q VLAN)

  802.1Q Tagged VLAN

  MAC VLAN Entries: 200

  Multicast VLAN

  Management VLAN

  VLAN VPN (QinQ): Max 256 entries

  GVRP

  Protocol VLAN: Protocol Template 16, Protocol VLAN 12 entries

  VLAN VPN

  Voice VLAN

  Private VLAN

Seguridad Port Isolation

  CPU-Defend

  ARP Inspection (Dynamic ARP Inspection)

  DoS Defend

  IP-MAC-Port Binding

  -1,024 Entries

  - DHCP Snooping

  - ARP Inspection

  - IPv4 Source Guard

  IPv6-MAC

  -Port Binding

  -1,024 Entries

  - DHCPv6 Snooping

  - ND Detection

  - ND Snooping

  - IPv6 Source Guard

  DHCP Filter

  Static/Dynamic Port Security

  - Up to 64 MAC addresses per port

  Broadcast/Multicast/Unknown-unicast Storm Control

  - kbps/ratio control mode

  802.1X

  - Port base authentication

  - Mac base authentication

  - VLAN Assignment

  - MAB

  - Guest VLAN

  - RADIUS authentication and accountability support

  AAA (including TACACS+)

  Secure web management through HTTPS with SSLv3/TLS 1.2

  Secure Command Line Interface (CLI) management with SSHv2

  IP/Port/MAC-based access control